Follow Us: Linked In Facebook Twitter
LCP-177 - Aerosol Spray Cans
Click on photo to enlarge image
Corrosion Protection For Electronic and Electrical Applications
Electronics Corrosion
Corrosion Prevention for Electronic
Switches, Contacts and Connectors
Corrosion Protection For Railways and Transportation
Railroad Switch Corrosion
Lubricant & Corrosion
Preventative Compound
Corrosion Protection For Marine Applications
Salt Water Corrosion
Lubricant & Corrosion Prevention
For Marine Technologies
Super CORR A is approved for use on Bombardier Aircraft

Aircraft Corrosion
Lubricant & corrosion prevention
compound for avionics & airframes

LCP-177 Product Overview

An ultra-thin film, lubricant and corrosion preventative compound that also displaces water and offers these unique benefits:

Corrosion protection and lubrication for electrical and electronic components and assemblies including: Printed Circuit Boards, electrical connectors and switch’s, electric motors, interior and exterior metal surfaces.

Forms an airtight seal preventing damage to electronics and other surfaces caused by exposure to acid gases such as Sulfur dioxide (SO2), Nitrogen dioxide (SO2), Hydrogen Sulfide (H2S), Ammonia (NH3), Chlorine based gases (CL12), and the thermal decomposition by-product of HFC-227ea used in fire suppression systems, Hydrogen Fluoride (HF).

• Non-flammable and Non-hazardous
• Formulated for aerosol spraying applications
• Corrosion preventative solution that is not an oil or wax base
• Compatible with all metals and most plastics
• Coatings will not run or harden and are self-healing
• In-transit short term protection for machined parts 
• Anti-corrosion inhibitors are hydrophobic and reject water from surfaces
• Superior moisture protection
• Surface static, electro migration and corona protection for electrical switchgear and circuit breakers

NOTE LCP-177 is to be applied as a corrosion preventative measure to a clean dry surface.
LCP-177 will not remove corrosion from an already corroded component or substrate

LCP-177 has a wide range of uses and applications:

LCP-177 is designed to protect and lubricate electrical connectors and terminations as well as electrical bonds and grounds, relays, fittings, circuit boards, computers, and all forms of avionics and electronics from moisture and corrosion.

LCP-177 forms an ultra-thin, hydrophobic, non-flammable lubricant film with anti-corrosion properties approximately 7 microns (0.00028 inch) in thickness. LCP-177 is compliant with U.S. EPA regulations and the European Union RoHS Directives. Use LCP-177 anywhere dissimilar metals may come in contact.

LCP-177 eliminates electrical resistance failures caused by general and fretting corrosion and to lubricate connectors, both micro, and conventional electrical switches, terminal blocks and Busbars, electrical bonds and grounds, relays and switching systems, multi-pin cable connectors, interior and exterior light sockets and wiring, plugs, connectors, and receptacles, as well as electronic printed circuit boards and micro-miniature circuits.

LCP-177  corrosion inhibitor will also protect electrical motors, battery post connectors, electronics and switches against surface static electricity, corona, and other electro migration problems. LCP-177 uses a very fast evaporating non-toxic and environmentally acceptable carrier fluid that is non-reactive to most plastics.

Components should be free of oils, flux and other surface contaminants prior to application of LCP-177.
It is highly recommended that a high-purity contact cleaner that cleans, dries and leaves no residue be used to remove soils and other contaminates prior to using LCP-177 . If, after the component is properly cleaned, there is visual evidence of corrosion damage, it may be necessary to replace the component. LCP-177  is not designed to nor will it remove or repair corrosion. It will clean and revitalize an intermittent connector but cannot repair or corroded damaged areas.

LCP-177 is packaged in 16 ounce aerosol cans with a net fill weight of 12 fluid ounces. 12 cans per case.

LCP-177 is now available to order. Let us provide your company a corrosion control solution.

For more information or advice please contact via email us using our contact form or by telephone 912-399-1559.

Read more about methods and procedures for application here.


See examples of how LCP-177  has helped prevent and control corrosion here.




CORR-EX, LLC - Corrosion Prevention And Control

216 King Cotton Road
GA 31525

CAGE Code: 6MWZ4



Tel: 1-912-399-1559
Fax: 1-912-319-5015

website last updated July 2016
© Copyright 2016 ALL RIGHTS RESERVED